LSD Wrote:yes, I do have revision 2.3
Ah, mine are both rev 1.3, but one is slightly modified by TBS to add some rev 2 features.
LSD Wrote:yes, I do have revision 2.3
cat /proc/asound/card1/pcm0p/sub0/hw_params
access: RW_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 2048
buffer_size: 8192
cat /proc/asound/card0/pcm0p/sub0/hw_params
access: RW_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 384
buffer_size: 8832
15:12:48 T:1948251200 INFO: CActiveAESink::OpenSink - initialize sink
15:12:48 T:1948251200 DEBUG: CActiveAESink::OpenSink - trying to open device ALSA:hdmi:CARD=imxhdmisoc,DEV=0,DEV=0
15:12:48 T:1948251200 INFO: CAESinkALSA::Initialize - Attempting to open device "hdmi:CARD=imxhdmisoc,DEV=0,DEV=0"
15:12:48 T:1948251200 INFO: CAESinkALSA::Initialize - Opened device "hdmi:CARD=imxhdmisoc,DEV=0,DEV=0,AES0=0x04,AES1=0x82,AES2=0x00,AES3=0x00"
15:12:48 T:1948251200 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
15:12:48 T:1948251200 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
15:12:48 T:1948251200 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 384, bufferSize 8820
15:12:48 T:1948251200 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 384, bufferSize 8832
15:12:48 T:1948251200 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 201 ms
15:12:48 T:1948251200 DEBUG: CAESinkALSA::GetChannelLayout - Input Channel Count: 2 Output Channel Count: 2
15:12:48 T:1948251200 DEBUG: CAESinkALSA::GetChannelLayout - Requested Layout: FL,FR
15:12:48 T:1948251200 DEBUG: CAESinkALSA::GetChannelLayout - Got Layout: FL,FR (ALSA: none)
15:12:48 T:1948251200 DEBUG: CActiveAESink::OpenSink - ALSA Initialized:
15:12:48 T:1948251200 DEBUG: Output Device : Device not found
15:12:48 T:1948251200 DEBUG: Sample Rate : 44100
15:12:48 T:1948251200 DEBUG: Sample Format : AE_FMT_S24NE4
15:12:48 T:1948251200 DEBUG: Channel Count : 2
15:12:48 T:1948251200 DEBUG: Channel Layout: FL,FR
15:12:48 T:1948251200 DEBUG: Frames : 384
15:12:48 T:1948251200 DEBUG: Frame Samples : 768
15:12:48 T:1948251200 DEBUG: Frame Size : 8
PeterB Wrote:My Sony TV, a KDL-55HX955, was working fine with OE 4.95.3. Then, yesterday, the TV received a firmware update over the Internet. Now, if I boot the Matrix with the TV powered on, or in standby, the TBS/OE splash screen appears but when Kodi starts, the screen goes blank and doesn't return. Kodi is definitely running - if I use the remote, I can hear the beeps in response to key presses.
If I boot the Matrix with the HDMI not connected and wait until Kodi is started, and then reconnect the HDMI, the display is fine.
I presume that this is an EDID problem, but it seems to be the opposite of the standard problem where the screen is blank if the TV is not connected/powered on at boot time.
Any suggestions of how to debug this problem, or fix it? Obviously, the standard advice using xrandr or examining xorg logs don't apply on the Matrix.
Hekser Wrote:Try to disable CEC in options. Paste here the kodi logs.
antonl1911 Wrote:PeterB
For me one of addons was giving the same symptoms. I've logged in via ssh, removed "ht..backdrops.." from /storage/.kodi/addons/ and did systemctl restart kodi. After that all was good.
--- a/xbmc/cores/AudioEngine/Sinks/AESinkALSA.cpp 2014-12-12 06:22:32.391714397 -0600
+++ b/xbmc/cores/AudioEngine/Sinks/AESinkALSA.cpp 2014-12-12 06:22:44.919673990 -0600
@@ -40,7 +40,7 @@
#endif
-#define AE_MIN_PERIODSIZE 256
+#define AE_MIN_PERIODSIZE 1024
#define ALSA_CHMAP_KERNEL_BLACKLIST
#define ALSA_OPTIONS (SND_PCM_NO_AUTO_FORMAT | SND_PCM_NO_AUTO_CHANNELS | SND_PCM_NO_AUTO_RESAMPLE)
Users browsing this forum: No registered users and 6 guests